Product Description:
Hydrophobic non-woven polypropylene fleece laminated to a grey pressure sensitive butyl adhesive, supplied on a pre-slit extended filmic release liner.
Application:
- Wall to Floor Joints in waterproofing applications
- IForming moisture/vapour seals on membranes
- Designed to accommodate differential expansion and contraction of substrates
Technical Details:
Gauge | 0.80mm |
Non Woven PP Fibre Mass: | 50g/M2 |
Adhesion Stainless Steel: | 14.3 N/cm |
PVC Slab: | 13.5N/cm |
Resistance to break: | Longitudinal: 18 N/cm Perpendicular: 13 N/cm |
Service Temperature: | -40ºC to 80ºC |
Application Temperature | 5° to 40°C |
Surface Preparation:
It is up to the users to check the compatibility with the surface in terms of adherence, chemical compatibility and staining over the range of the application temperatures. The surfaces must be clean, dry and free of dust. In the case of friable, porous or fragile surface, it is advisable to stabilise them with a liquid primer. When replacing a bituminous tape, clean the surface of all bitumen traces and degrease with a solvent.
Storage:
Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.